Specifications include, but are not limited to: Placement, in its entirety, of the tension wires and attachment system (ties/hog rings) along the entire perimeter fence at both sides. This work will also include the temporary removal of the existing razor ribbon tape and its re-installation over the new tension wires with new attachment system. A new double strand high-tensile galvanized class 3 barbed wire is specified as the new tension wire system. A couple of sections of the existing razor ribbon tape need to be replaced with new (2 tier) S.S. razor ribbon tape (+/-747 linear feet). The project includes two deduct alternates. Alternate #1: Delete all work associated with new 22 feet section of inside chain-link fence at gate #43 location and the work associated with a new 10 foot pedestrian double gate. Alternate #2: Delete all work associated with new wall-mounted arm support brackets, barbed wire, and (2 tier) S.S. razor ribbon tape (+/-235 linear feet) at the Admin/Pre-Trial Building and Tower #5 building area.