Loading...
Skip to main content
< Back to results

Sand Fence


Location
Delaware
Publication Date
08/05/2019 10:48 AM EDT
Closing Date
08/22/2019 02:00 PM EDT
Issuing Organization
State of Delaware - Department of Natural Resources and Environmental Control
Solicitation Number
Description

Specifications include, but are not limited to: Option No. 1 SLAT MATERIAL: The slats shall be No. 1 grade of White Cedar, Spruce, Douglas Fir or other approved species of wood substantially free from excess wane, knots, decay, broken or short slats and unsquare ends. SLAT SIZES: The slat shall be a full ½ inch thick by a full 1-1/2 inches wide by 4 feet high and unpainted. WIRE: The wire shall be not less than 14 gauge with a zinc coating of not less than 0.3 oz./square foot of uncoated wire surface and it shall have a tensile strength of 65,000 to 80,000 psi. FABRICATION: The slats shall be spaced not less than 2 inches nor more than 2-1/4 inches apart. There shall be not less than 2-1/2 twists (one twist equals 360 degrees) of wire between the slats. The five (5) strands of wire shall be placed 10 inches apart and 4 inches from each end. The wire shall be woven in such a manner that the zinc coating shall not be removed nor the strength of the steel impaired. The fence shall be stretched after weaving and before being placed in rolls 50 feet in length. The material used for fabrication must originate from North America. Option No. 2 SLAT MATERIAL: The slats shall be No. 1 grade of White Cedar, Spruce, Douglas Fir or other approved species of wood substantially free from excess wane, knots, decay, broken or short slats and unsquare ends. SLAT SIZES: The slat shall be a full 3/8 inch thick by a full 1-1/2 inches wide by 4 feet high and unpainted. WIRE: The wire shall be not less than 14 gauge with a zinc coating of not less than 0.3 oz./square foot of uncoated wire surface and it shall have a tensile strength of 65,000 to 80,000 psi. FABRICATION: The slats shall be spaced not less than 2 inches nor more than 2-1/4 inches apart. There shall be not less than 2-1/2 twists (one twist equals 360 degrees) of wire between the slats. The five (5) strands of wire shall be placed 10 inches apart and 4 inches from each end. The wire shall be woven in such a manner that the zinc coating shall not be removed nor the strength of the steel impaired. The fence shall be stretched after weaving and before being placed in rolls 50 feet in length. The material used for fabrication must originate from North America.

Get instant access

Get instant access to solicitation details & future business opportunities.

to solicitation details & future business opportunities.

Get Access

Vendor packages with access to similar open solicitations

Matching bid notifications & access to all Statewide & Group bid details

Statewide

Matching bid notifications & access to all Statewide & Group bid details

Matching bid notifications from participating agencies

Group

Matching bid notifications from participating agencies

Access participating agency bids

Basic

Access participating agency bids