Specifications include, but are not limited to: The gates dimensions will be 25 feet wide and 15 feet high and the new spacing between the gates will be 95feet. Furnish and install 13 feet high black vinyl chain link fence X 3/8 inch non-climb mini mesh with galvanized steel framework on the entire enclosure and gates. Fence will have Top, middle and bottom rails with 24 inch stainless steel reinforced razor wire on top. All post shall be in concrete concrete footings and a concrete grade beam will enclose all fencing to the ground. Two gates to cover the openings shall be supplied and installed. Tymetal PLUSS gate system shall be installed to meet the MFG requirements to include the track heater on the bottom sliding track for winter conditions. Tymetal PLUSS Gate operator will be CLASS IV (constant pressure controls) variable speed chain drive operator -- 2.2 second capability. Tymetal motor (variable speed with low voltage controls) power should be shall be determined by the state at the time of the walk through.