Specifications include, but are not limited to: 4.1.1 Provide visualization of persons inside all school building hallways and office areas (RHAM Middle and High Schools). Minimum camera requirements are 5 megapixels or comparable specifications. District goal is clear visualization. 4.1.2 Provide facial recognition capability at all main points of entry for all facilities mentioned above as well as: maintenance facility, parking lots and fields. Minimum camera requirements are 5 megapixels or comparable specifications. District goal is clear facial recognition. 4.1.3 Provide visualization of driveway entry and exit points as well as parking for all facilities. District goal is to capture vehicle description and/or identification criteria such as license plates. 4.1.4 Appropriate video management system (VMS) and storage should be included for each school facility. Auxiliary facilities should be included with RHAM Middle and High VMS and storage. Minimum storage capacity requirements are 30 days of storage. 4.1.5 Appropriate VMS with the capability to integrate with an access control system should be included along with a list of said access control systems. 4.1.6 If applicable provide VMS certification along with an expiration date. 4.1.7 Appendix A contains information on the District’s current status. Please provide cost and location of additional cameras/drops needed. 4.1.8 All network parts should be clearly defined by facility to include but not limited to patch panels, network drops, cabling, and installation.\ The manufacture of equipment will be Avigilon with the below minimum guidelines: A. Increase HD NVR Avigilon at least useable storage as required for additional cameras B. 24/7 video monitoring and image capture C. Minimum of 5.0 MP, 30 ips 5.8 Day / night resolution with WIDE DYNAMIC function for Sun and or Ambient Light interference D. Motion detection/ auto-focus capability E. Two Options for the connection and cabling of the cameras below: a. Cameras cabled back to the MDF/IDF using Cat6 cabling and patched into Power over Ethernet switches (PoE) at the MDF/IDF. Switches required to be quoted in this options. b. Cameras to use existing COAX cabling with the proper video conversion.