Specifications include, but are not limited to: The reclamation of bituminous concrete and sub-base material to a depth of six to eight (6-8) inches for the full width of the road using a RP-250 Caterpillar Reclamation equipment or equivalent. The road will be reclaimed, rough graded, fine graded and rolled using a grader and ten (10) ton vibratory roller or equal. All catch basin tops will be covered during reclamation. The Director of Public Works will be available to assist in checking the vertical distance from the crown of the road to the gutter before final rolling begins, but the burden of responsibility will fall on the Contractor. The Contractor will supply the necessary labor and equipment necessary for checking grades. Puddling is not acceptable and must be corrected prior to payment. One lane of traffic will remain open at all times for local access and emergency vehicles. The Contractor will remove all rocks from the reclamation from the site. One lane of traffic will be open at all times for local access and emergency vehicles. The Contractor and the Director of Public Works will verify the SY of reclamation for payment.