Specifications include, but are not limited to: Repair of four (4) tennis courts. The existing tennis courts require repairs to cracks and low spots “birdbaths”. Further the Tennis Court lines need to be repainted and the fencing around the courts needs to be removed and replaced. Option 1: 1. CLEANING - Soap and pressure wash court to remove as much loose paint, dirt and deteriorated surface as possible. Water access is available onsite 2. CRACK REPAIR- Clean out and repair all cracks on the courts. Inspect and repair all center strap anchor points. 3. FENCING - Remove and replace fence material; replace with ss40 poles and 8-gauge fuse bonded wire material in black coating. Includes (3) gates and (4) leaf gates and an additional double drive gate. 3” terminal poles and 2 1/2” line posts with top rail and bottom tension wire with middle corner bracing. 4. ACRYLIC COLOR COATING- Furnish and install the (2) coat acrylic color coating surface system to entire area. 5. LINE STRIPING- Layout and mask all lines per United States Tennis Association requirements for (4) courts. Option 2: 1. CLEANING - Soap and pressure wash court to remove as much loose paint, dirt and deteriorated surface as possible. Water access is available onsite 2. CRACK REPAIR- Clean out and repair all cracks on the courts. Inspect and repair all center strap anchor points. 3. ACRYLIC COLOR COATING- Furnish and install the (2) coat acrylic color coating surface system to entire area. 4. LINE STRIPING- Layout and mask all lines per USTA for (4) courts. Option 3: FENCING - Remove and replace fence material; replace with ss40 poles and 8-gauge fuse bonded wire material. Includes (3) gates and (4) leaf gates and an additional double drive gate. 3” terminal poles and 2 1/2” line posts with top rail and bottom tension wire with middle corner bracing.