Specifications include, but are not limited to: These specifications outline the requirements for multiple-year purchase of new and ready for service cutaway minibuses built on Ford or Chevrolet chassis or approved equal and equipped with a side lift. The District intends to use these buses to provide service under its “ADA” program. Actual service is rendered by the District’s contractor referred as ‘Service Providers’ in these specifications. The basic vehicle, both chassis and body, must be a current year factory production cutaway model that is catalogued by the manufacturer and for which manufacturer's published literature and printed specifications are currently available. This specification is intended for use in the purchase of a complete vehicle unit and all equipment and accessories necessary for its operation. All parts shall be new. All parts, equipment, and accessories shall be completely installed, assembled and/or adjusted as required. Each unit is to be equipped with a right side mobility aid lift and door. The intent of these specifications is to meet or exceed current ADA rules and regulations. By submitting its proposal, the Proposer is herein certifying that its proposed vehicle meets all ADA rules and regulations at the time of manufacture. All ADA regulations must be followed even though they may not be specifically mentioned in these specifications.