Specifications include, but are not limited to: Plow Size/Shape Plow Length: 11' length Moldboard Trip: Full trip with 2 external compression springs Pushframe Type: Standard Circle Frame with top mount cylinders Pins are all tool steel hardened with tool steel bushings welded into all pin connections including the rib points on mold board the cylinders are designed to always be at an angle, direct push cylinders are not acceptable. The push frame "A" frame is mounted over the top of the pivot frame Moldboard Height: 42" height Moldboard Shield: Integral shield Moldboard Options Moldboard Sheet Material: 3/16" GR50 steel Moldboard Cut-Out / Ears: Mailbox cutout on right side of moldboard Adjustable Trip Spring: Five position adjustable trip spring preload Hydraulic Cylinders: 3" x 1 1/2" x 10" reversing nitride cylinders Paint: Powder coat