Specifications include, but are not limited to: Provide a limited topographic survey for the purpose of design and permitting of this expansion and site improvements. The survey is limited to the area of the proposed work. See attached survey area sketch. Boundary survey is not included. Survey proposal is to include a budget for locating and mapping below-ground utilities not located in a visible survey. Utility location is to be performed or subcontracted by proposing firm. Prepare a Class T-2 topographic survey to be added to the existing boundary survey. The survey will be consistent with Class A-2 accuracy standards. The topographic information is to be prepared at 40th scale at 2 foot contour intervals, performed in accordance with State Regulations Section 20-300b-(1-20). Deliverable is to be an AutoCAD (DWG file) base map suitable for use by the design and engineering team. Survey to include: • Field survey 20 feet beyond areas indicated on attached sketch. • Locate edge of vegetation, wood line, as well as any trees 6” in diameter or greater in subject area