Specifications include, but are not limited to: A vendor to manufacture and install a mock submarine hull structure at Ella T. Grasso Technical High School, located at 189 Fort Hill Road, Groton, CT 06340. Exhibit B includes the specifications to which the mock submarine hull must be manufactured. Any variations recommended by fabricator must be approved by TRCC. The design will not have to conform to any NAVSEA requirements but will have to meet any basic safety needs of personnel working inside. The final product shall have a coating of black paint throughout the exterior mock up. Interior should be taped so exterior paint does not get on interior wall Exhibit C includes a drawing for the overhead coiling doors through which the delivery will be made. The doorway is a 12’ x 12’ roll up door. No additional lifting equipment is on site. Awarded vendor will need to arrange for a forklift or other means to bring the pieces in the building – no extravagant rigging is necessary to bring them in the door. The floor is reinforced concrete and can easily handle the weight but the frame structure will not allow lifting from it.