Specifications include, but are not limited to: A. Maintain Floors Using Hard Surface Floor Care Specifications: Please refer to Hard Surface /Resilient Tile Floor Care specifications (as described in section 23 of this Exhibit A). B. Clean Rugs and Carpets: Remove all gum and foreign matter and spot clean daily. Please refer to Carpet Specifications (as described in section 25 “Carpet Cleaning and Maintenance Specifications” of this Exhibit A). Maintain all carpets using procedures described in the specifications for carpet maintenance. C. Empty and Clean Trash Receptacles and Paper Recycling Containers: I. The Contractor shall empty all trash receptacles. Liners must be replaced. All trash must be bagged before it is placed in the dumpster. The interiors and exteriors of trash receptacles must be free of trash, liquid, gum, grease, and other foreign substances. Those trash receptacles, which are found to contain liquids or other substances, which could cause odors, must be washed out and dried before new liners are installed. The Contractor shall place the removed trash into the dumpster/container located in the appropriate location. No trash should be placed on the ground or on top of the trash container. Breakdown all cardboard and place in proper dumpster. Clean area around dumpster.