Specifications include, but are not limited to: Qualified contractors to provide all labor, material, equipment, delivery and all else necessary for the Town-wide application of Polymer Asphalt Surface Sealer, “Chip Seal”, as further described herein. The work shall be done in the following order: Preparing the pavement surface, Applying the Polymer Modified Asphalt Surface Sealer, Applying aggregate, Rolling the aggregate, Sweeping up and disposing of excess aggregate off the job site. Prior to chip seal operations, the Contractor shall sweep the entire surface with vacuum assisted power brooms. Prior to Chip Seal operation, the Contractor shall remove any and all vegetation within the limits of the chip seal by applying approved herbicide. Remove all existing thermoplastic striping, legends, and raised pavement markers, as well as any excessive adhesive left of the pavement.