Specifications include, but are not limited to: A. Sweep, dust mop and/or vacuum all areas under contracted services and remove rubbish from premises, wash all trash receptacles. B. Wash all washable walls, sills, blackboards, interior windows (both sides) and woodwork including doors. C. Clean both sides of all interior glass surfaces including windows, doors, showcases, etc. D. Wash all window ledges in classrooms, hallways and stairways. E. Wash all lockers, interior and exterior, including spacers and base plates. F. Strip all tile floors thoroughly in all areas identified as being servied by “Outside Custodial Cleaners” on the attached maps for the high school, removing all gum and rinse thoroughly more than once with clean water if necessary, ending with clean rinse water. 1. Buffing floors after rinse will help if floor did not clean well. 2. Wash all terrazzo surfaces – staircases and landings where applicable. 3. Wash and buff corridor tiles. 4. Vacuum and shampoo all rugs G. In accordance with floor tile manufacturer’s recommendations, apply three fine coats of wax or floor finish to all classrooms as specified. First coat 4” to 6” from baseboard; final coat to cover entire floor area. Apply 5 fine coats of wax or floor finish to all hallways as specified. H. Wash all classroom furniture, students’ and teachers’ desks. Polish surface of teachers’ desks, set up classrooms for return to school of personnel in August. I. Wash all exterior windows, both interior and exterior surfaces. J. Clean all light fixtures, i.e. egg crate diffusers, reflector shields, etc.