Specifications include, but are not limited to: A Dust Mop and Wash all Quarry style Tile Floors: Remove, clean, and then replace objects not permanently affixed to floor. Wash using disinfectant solution changing water frequently. Adequate number of “Caution” and “wet Floor” signs must always be used to inform the public when any floor is being maintained or is wet. C Empty and Clean Trash Receptacles and Paper Recycling Containers: The Contractor shall empty all trash receptacles. Liners will be replaced. All trash must be bagged before it is placed in the dumpster. The interiors and exteriors of trash receptacles will be free of trash, liquid, gum, grease, and other foreign substances. Those trash receptacles, which are found to contain liquids or other substances, which could cause odors, will be washed out and dried before new liners are installed. The Contractor shall place the removed trash into the dumpster/container located in the appropriate location. No trash should be placed on the ground or on top of the trash container. Breakdown all cardboard and place in proper dumpster. Clean area around dumpster. Empty the intermediate white and/or mixed paper recycling containers daily into the appropriate collection dumpster. There should be no co-mingling. Mixed paper should not be put into any regular trash containers but must be collected and disposed of separately. Cardboard Boxes: Cardboard must be broken down separately and removed from all areas daily throughout the Facility. Cardboard should be kept separate from all trash and other recycling materials and put in the proper dumpster. D Clean Ash Receptacles: Empty all ashtrays, ash stands, sand urns, and clean with damp cloth. Wash all ash receptacles and replace sand material monthly or upon request by the Client Agency Designee. E Dust Furniture: Wipe all furniture clean with a treated duster or cloth, including but not restricted to desk(s), table(s), bookcase(s), file cabinet(s), shelf(ves), counter(s), and telephone(s). F Dust Interior Surfaces: Dust all surfaces such as rails, ledges, windowsills, partitions, blinds, vents, baseboards, etc. Wash clean where necessary G Clean Walls and Partitions: Wipe all walls, partitions, and doors with a cloth and clean water. Clean and polish with suitable material, all bright work, water fountains, etc.