Specifications include, but are not limited to: 2A-1 WHELEN ONLY Liberty II Series LED Lightbar Model # IW8BRBR with Whelen one ITL12 12-LED takedown lights; Three IBDLK Duo series long LED flasher amber/red. Three IBDLM Duo series long LED flasher amber/blue; Two IA3 super LED alley lights. Two IWDLB long blue solo series LED; Two IWDLR long red solo series LED; One MKAJ105 2020 Ford Interceptor Utility mounting kit. ALL mounting brackets, hardware and wiring shall be included. Shall include programming software and any licensing required for software use. 2A-2 Update Liberty Light bars owned by the City replacement lens kit Whelen 9LLENKT3 2A-4 Install Liberty Light bars owned by the City on vehicle to include mounting brackets RMKAJ105 for 2020 Ford Utility 2B Whelen ONLY Vertex LED corner hide-away system Two Vertex Super LED VTX609 for Front Corners in Headlight Housings( one blue one red) Two Vertex Super LED VTX609B for Rear Taillight Housings. (reverse light section on lens) Two Vertex Super LED VTX609R for Rear Taillight Housings 2B-1 Customer will supply Vertex lights only. Corner hide-away system 6 corner hide-away LED system installed including wiring and all hardware. To include mounting brackets, to be wired to specified controller. One in each head light and two in each taillight. 2C Whelen ION-V Series Mirror Beam model VMFX20RB to be configured with controller to turn white and illuminate when the take down lights are activated. Supplied and installed including all hardware, cables and wiring (WHELEN ONLY) for 2020 Ford Interceptor Utility. Whelen LINSV2 Series Under Mirror Lights model LINSV2* and mounting bracket mode LSVBKT50 shall also be supplied, installed, and configured for warning and ground illumination. Color: Left side RED right side BLUE 2D-1 Headlight flashing system. Connect to factory Module and wired to specified controller