Specifications include, but are not limited to: Removal and disposal of approximately two hundred forty (240) square feet of poured-in-place material within fall zone of belt swings. Contractor must ensure that all existing components meet current impact attenuation per ASTM 1292-17.-Reinstall base layer of poured-in-place per manufacturer recommendations in the areas that require increased critical fall height attenuation in addition to the cap as detailed below.-Repair of existing base layer as necessary and installation of ½ inch poured-in-place surfacing cap totaling five thousand fifty (5,050) square feet across entire site of larger playground/smaller rock climbing area using 50/50 blend of black and beige colors.