Get instant access

to solicitation details & future business opportunities.

Get Access

Vendor packages with access to similar open solicitations

Statewide

Matching bid notifications & access to all Statewide & Group bid details

Group

Matching bid notifications from participating agencies

Basic

Access participating agency bids

Basic Information

Reference Number

0000189529

Issuing Organization

CDOT CPCS & PROPERTY MANAGEMENT

Owner Organization

CDOT - DTD

Solicitation Type

RFQ - Request for Quote (Formal)

Solicitation Number

DQ 18-211 NM

Title

DTD Storm Water Sampler System

Source ID

PU.AG.USA.2386.C2710326

Details

Location

United States, Colorado, Denver County

Piggyback Contract

Description

Specifications:
Delivery of materials: No later than May 19, 2018

Delivery Address: CDOT HQ, ATTN: Jane Hann

Before May 4, 2018:
4201 E. Arkansas Avenue
Denver, CO 80222

After May 4, 2018:
2829 W. Howard Pl.
Denver, CO 80204

Delivery will be Monday through Friday 8:00 am to 3:00 pm.

b. Specifications:
Installation is not to be included as this is for materials only as listed below:

1. Signature® Portable Area Velocity Flow Meter System. Starting price includes base meter 624300006, carrying handle with stand, 1 ft (0.3 m) TIENet® receptacle cable, 12 VDC power input cable, TIENet 350 area velocity sensor with 32.8 ft (10 m) cable, instruction manual, pocket guide, and coupon for Isco Open Channel Flow Meter Handbook. - 1EA
2. Configured option: mounting hardware - 1EA
3. Configured option: cable lengths - 1EA
4. Configured option: power - 1EA
5. Configured option: I/O - 1EA
6. Configured option: interfaces - 1EA
7. Configured option: communication - 1EA
8. Configured option: totalizer - 1EA
9. Configured option: rain gauge connector - 1EA
10. TIENet® 306 Sampler Interface with 10 m (32.8 ft) cable. Interface cable includes a TIENet plug. Supports flow pacing and sampler enabling. - 1EA
11. Rain Gauge Receptacle connection only with 0.305 m (1 ft) cable. Order rain gauge separately. Includes three-hold cord grip fitting. - 1EA
12. Sensor mounting plate. Flat plate for mounting up to 3 sensors in rectangular, trapezoidal or irregular channels. Includes plastic ties to fasten the sensor cable, and installation instructions. Requires carriers for low profile area velocity sensors, submerged probes, pH probes, temperature probes, bubble lines, D.O. sensors, and pH sensors. Not recommended for ADFM/accQpulse sensors. - 1EA
13. SPA 2045. Cable, external 12 VDC to power Signature® meter. This cut to length cable, 50-foot maximum length, is equipped with a TIENet® cord grip fitting (209-0073-11) for watertight connection to the Signature meter in non-conduit applications, a fuse, pigtail wires to connect to the Signature® meters internal barrier block and 5/16-inch ring terminals for connection to an external 12 VDC source. - 1EA
14. SPA 1347. Solar Panel with bracket, 40 watts, for use with customer supplied battery; 100 amp-hour or greater recommended. Includes pole mount bracket and an 8 ft cable with two 5/16-inch terminal lugs for connection to lead acid battery. - 1EA
15. 12 VDC connect cable from the battery to an Isco device to power Isco devices excluding 2100 modules. - 1EA
16. 2100 Series Module battery connect cable. - 1EA
17. Model 3700 Full Size Portable Sampler. Includes controller, top cover, center section, base, distributor arm, instruction manual, and pocket guide. Does not include bottle configuration kit or pump tubing. - 1EA
18. Single-bottle Configuration for 3700 Full Size Portable Sampler. Includes one polyethylene 2.5 gallon (10-liter) round bottle with cap, locating insert, float overflow shut-off, and two pump tubes. - 1EA
19. 3/8 inch vinyl suction line - 100 ft. Includes tubing coupler. - 1EA
20. 3/8 inch stainless steel strainer, low flow. - 1EA
21. 3/8 inch standard weighted polypropylene strainer. - 1EA
22. Sensor carrier for attaching low profile area velocity sensor to Isco mounting rings or sensor mounting plate. - 1EA
23. SPA 921. GLS/3700/6700/Signature Portable Custom Length Connect cable for external 12 VDC source via ring terminals. Cable for powering portable Isco sampler or flow meters from an external 12 VDC source, such as an automotive or deep-cycle marine battery. Terminates in 5/16" terminals for direct connection to external battery. For use with Isco GLS, 3700, 6100, 6700 Series portable samplers and Signature Portable flow meters. Max length is 50ft. Appropriate for 40W and 110W solar panels. Contact SPA department for details regarding connection to 5800/4700 refrigerated sampler with battery backed input. - 1FOOT
24. Flowlink 5.1 Software, two user licenses. For retrievingmeasurement, parameter, and sample data from Isco 2100 Series Modules and 2101 Field Wizard, 4100 Series Flow Loggers, 4200 Series Flow Meters, Pulsed Doppler Flow Meters, 6700 Series/Avalanche Samplers, 676 and 677 Logging Rain Gauge Systems, and 581 Rapid Transfer Device. Stores data in a database and generates a variety of user-customizable graphs and tables. Data can also be exported in ASCII format for analysis by programs such as Microsoft Excel, HTML format for viewing in a web browser, and PDF format for viewing in Adobe Reader. Operates on Windows XP, Vista, 7, Server 2003, and Server 2008. Supplied on CD-ROM. Software supports multiple languages, one of which is selected during installation. - 1EA
25. CDMA cellular modem with magnetic mount antenna forSignature® meter. Serial-Over-Internet-protocol (SOIP) technology eliminates need for computer telephone modems. Requires
Verizon service. Contact the factory for details regarding Verizon service requirements. - 1EA
26. 674 Rain Gauge. Tips every 0.01 inch of rainfall. Tipping bucket rain gauge with 50 ft. cable and connector for use with a 4100 Series Flow Logger, 4200 Series Flow Meter, or 6700 Series/Avalanche Sampler. Includes instruction manual. - 1EA
27. Freight - 1EA

Dates

Publication

04/19/2018 04:15 PM MDT

Closing Date

04/26/2018 02:00 PM MDT

Contact Information

Natalie Martinez

303-757-9374

natalie.a.martinez@state.co.us

Buyer Preferences, Guidelines & Requirements

Award Requirements

- All or None Award

Bid Submission Process

Bid Submission Type

Electronic Bid Submission

Pricing

Lump sum

Additional Bidding Instructions

Stop !!!!!

Please read these Instructions before Proceeding to the Bid Solicitation.
CDOT will not accept a submission on Rocky Mountain Bids.
All CDOT Bid Submissions must be downloaded on the CDOT Supplier Portal @
www.codot.gov/business/procurement-and-contract-services

If you need assistance with your submission, please contact our HELP DESK @ 303-757-9848.

Disclaimer Please review specifications and instructions to respond.