Specifications include, but are not limited to: a. Contractor shall: 1) Inspect and test blinds prior to removal to ensure blinds are working properly; 2) Ensure all cords, tilters, wands, and all parts of blinds are intact and working properly; 3) Remove blinds; 4) Clean blinds offsite using ultrasonic cleaning technology; 5) Reinstall blinds to its original window and at its original facility location; 6) Test blinds and all parts of blinds after installation to ensure they are working properly; 7) Inform the Janitorial Supervisor if blinds are not working properly before removal and after reinstallation; 8) Maintain records and logs for all service requests; and 9) Abide by the Department of Industrial Relations General Industry Safety Orders, §3282 General Requirements for All Window Cleaning Operations. b. Contractor shall provide all personnel the uniforms, tools, equipment, parts, cleaning chemicals and solutions, and safety equipment and devices necessary to perform the services. c. All other materials and supplies required to perform these services and not otherwise mentioned, shall be provided by Contractor at its expense including but not limited to cleaning chemicals and solutions, transportation, and blinds replacement parts, such as tilter replacement, re-cord, and replacement wands. Bidders shall consider all cost when quoting services on the bid form. d. Contractor shall provide and install temporary window coverings when necessary. e. Contractor shall respond to all service requests within 24 hours regardless of the location in the County. f. During normal service requests, blinds should be reinstalled within two business days from pick up date. Installation hours should be between 5:00 a.m. and 11:00 a.m. Contractor should contact the Janitorial Supervisor one day prior to reinstallation to provide the time the blinds shall be reinstalled.