Specifications include, but are not limited to: A.Perform site soils investigations and create an initial and final project Geotechnical Report as needed for submission to the State reviewing agency (Division of the State Architect) and adequate to fulfill the technical data needs of the Architectural/Structural design team and development of Construction Drawings and Specifications. The District will include the report as a construction bid package exhibit as well.B.In addition, consultant shall propose onthe following services, although not limited to:•Review existing soils reports from nearby projects•Address any special subgrade treatments required•Address any special issues associated with major utility relocations•Identify groundwater levels and bedrock elevations•Determine allowable soil bearing pressure and lateral resistance•Determine areas of undocumented fill versus undisturbed native soils•Define the parameters for controlled fill, backfill, subgrade preparations, over-excavation andre-compact, scarifications andre-compact, proof-rolling, dewatering, compaction, utility trenches, etc.•Make recommendations for asphalt paving sections, concrete paving sections, concrete SOG section, concrete flatwork, concrete swales, curb and gutter. Specifyminimum parameters for rebar, mesh, dowelling, joint spacing, aggregate sub-base, concrete psi, cement type, admixtures, footings, etc.•Address surface drainage, foundation drainage, waterproofing of retaining walls and planters, waterstops, etc.•Address soil corrosion, soil soluble chlorides, and soil soluble sulfides•Address and specifically analyze the predicted horizontal and vertical movements between structures as it relates to seismic forces and differential settlement.•Subsurface exploration, fault hazard assessment, laboratory testing, geotechnical engineering evaluation, structure seismic loading geotechnical report preparation