Specifications include, but are not limited to: Standard Mechanical Equipment: 1.1.1 GVWR: Not to exceed 26,000 1.1.2 Wheelbase: 200” 1.1.3 Tires: Low rolling resistance with premium highway tread and traction 1.1.4 Engine: 4 cylinder 317 CID (5.2L), 215 HP at 2500 RPM, 520 ft.-lb gross torque at 1600 rpm. 16 valve, four cycle, overhead cam, turbocharged, inter-cooled, water cooled EGR valve, direct injection, electronically controlled common rail fuel system, engine cruise control function. Oil level check switch and light. Engine warning system with audible warning for low oil pressure, high coolant temperature, and low coolant level; Block heater element 1.1.5 Transmission: Allison RDS 2550 / 6 speed with PTO gear 1.1.6 Alternator: 140 AMP with integral regulator 1.1.7 Air Cleaner: Dry paper single element with air restriction indicator in MID 1.1.8 Emissions: California and Federal 1.1.9 Battery: Dual 12-Volt maintenance free group 31 750 CCA batteries with threaded posts 1.1.10 Exhaust: Single horizontal with DPF/SCR exhaust system, cooler and electronic exhaust restriction 1.1.11 Fuel Tank: Side-mounted, 100 gallon capacity 1.1.12 Brakes: Butterfly valve type, air controlled, full air dual circuit, scam, drum; Brake system power antilock; Heated air dryer; In wheel air brake parking brake; Automatic slack adjusters 1.1.13 Frame: Straight frame, 80,000 PSI, 33.5 wide; Two front tow hooks; Black color 1.1.14 Front Springs: 12,000 lb. capacity; Taper-leaf 1.1.15 Rear Springs: 21,000 lb. capacity; Multi-leaf, bolted 1.1.16 Front Hub Lube: Oil bath 1.1.17 Front Stabilizer Bar 1.1.18 Cooling: Heavy duty radiator 1.1.19 Air Compressor: Heavy duty 1.1.20 Air Intake: Vertical, rear cab mounted