Specifications include, but are not limited to: The Contractor shall examine carefully the site of the work and the plans and specifications therefore. The Contractor shall investigate to their satisfaction as to conditions to be encountered, the character, quality, and quantity of surface, subsurface materials or obstacles to be encountered, the work to be performed, materials to be furnished, and as to the requirements of the bid, plans and specifications of the contract. 1. Contractor shall deliver letters/door hangers to the residents, businesses and/or school to be affected at least 48-72 hours in advance prior to start of road work. 2. Post “No Parking – Tow Away” sign one 48-72 hours in advance of start of road work, signs must state the day of the week and hours parking or access will be restricted. 3. Remove and dispose of existing thermoplastic/paint striping, reflectors, button, and pavement markings. 4. Tape thermoplastic Chevron arrows on speed humps or lumps with duct tape and apply micro-surfacing at each location. The micro-surfacing material will be feathered on each side of the speed humps. 5. Power vacuum sweeper and hand clean existing pavement surface and remove all debris, tree saps, imbedded dirt, vegetation and anything on the surface that might impact the application of type II microsurfacing. 6. Cover all utility covers using thick plastic sheeting and mark the location on the sidewalk. Microsurfacing shall be installed from the outer rim of the utility cover. 7. Expose all utility covers. Sweep curb, gutter, sidewalk, driveway, and street. Install temporary pavement markings. 8. Install detectable warning surface (truncated dome) per manufacture specification. 9. Install thermoplastic/paint striping with reflectors (includes blue buttons at Fire Hydrants) and pavement markings as existing. Striping shall be done seven days after the Micro-surfacing. 10. Such other items specified and required providing a smooth uniform riding surface and otherwise conforming to the specifications.