Specifications include, but are not limited to: The work to be done consists of furnishing all labor, materials, equipment, tools, and incidentals, as required by the Plans (Drawing Number 1128, Sheets 1 through 86), Specifications, and Contract Documents, for the construction of approximately half mile Class I bicycle and pedestrian path, and two miles of Class II bike lane with bicycle amenities; raised medians; a bus stop; cold milling existing pavement and re-paving with asphalt rubber hot mix (ARHM); removal and installation of traffic striping and raised pavement marking; replacement of curb and gutter and other drainage improvements; various traffic signals improvements to include new equipment, bicycle signal detection, and bicycle/pedestrian push buttons; street lighting; illuminated street name sign; and streetscape beautification with narrowed travel lanes to enhance bike and pedestrian mobility and safety. Clean up and leave in an operable and acceptable condition all of the work and other items not mentioned that are required by the Plans and Specifications.