At Mokelumne Aqueduct Station 1408: Furnish and install two precast concrete vaults and associated piping; modify fittings and piping in Aqueducts No. 1 and No. 2 vaults to add a furnished 6" tee and replace existing air release valves with furnished air release valves; rent and install a potable water equalization tank and provide water level instrumentation; furnish and install customer wooden power poles; construct site improvements; furnish and install a skid mounted packaged pumping system integrated with the PLC, instrumentation, piping, and valves; perform PLC programming and integration of the packaged pumping system; furnish and install radio and antenna; furnish and install approximately 220 feet of 8" ML&CS, 120 feet of 8" mortar lined and inorganic zinc coated steel pipe, 15 feet of 6" mortar lined and fusion bonded epoxy coated steel pipe, 10 feet of 6" mortar lined and inorganic zinc coated steel pipe. At the well site, about 3 miles north of Station 1408: Modify well control panel to start and stop the well pump remotely and install a 480 to 120-volt transformer inside the control panel; furnish and install valve position switches; furnish and install radio and antenna; furnish and install wooden pole; and perform related required work, located as shown on Drawings.