Specifications include, but are not limited to: Bricklayer/Blocklayer to remove existing section of the damaged block wall and install wall repairs as follows: o The repair of the wall shall include FULL blocks where full blocks were provided in the original installation of the wall. o All grout lines in the new wall shall match the existing grout lines of the wall in both vertical and horizontal directions. o The type of block used to repair the wall shall match the existing material (i.e. slumpstone, split face, precision, etc.) o The color of the block and grout used shall match the existing wall to the extent feasible. Repair block wall per LMAD Wall Standard o See attached detail sheet Permit required o All wall repair work shall be permitted and inspected by the City of Victorville’s Building Division including foundations, block placement, reinforcement, and final inspection. See Scope of Work description above See attached brochure o Special Instructions: Once footing is completely cleaned and exposed, an inspection of footing by the Building Department is required prior to proceeding with the wall rebuild. Requires an approved traffic control plan o As these repairs are located within the public right-of-way, you must submit a traffic control plan to the City of Victorville Traffic Engineer for approval. o All traffic control plans must conform to the Standards for Temporary Traffic Control