Specifications include, but are not limited to: 1. The measurement is approximately 2,085 Sq. ft. with additional 32 lineal feet of chair rail, and 8 lineal feet of corner guards; 2. Contractor shall provide Sherwin Williams paint - Swatches: Promar 200 – SW7004 Snowbound, SW6431 Leap Frog, or equal. If quoting an or equal please provide: Brand name, Color reference number and Swatches with quote submittal. 3. Before painting in any section of the building, use drop sheets and masking tape and remove electrical plates wherever necessary to protect finished work or other surfaces liable to damage during painting; 4. This work may require moving or lifting furniture as needed away from the areas/surfaces receiving paint; 5. Care needs be exercised while moving or lifting furniture to prevent damage to them; 6. All holes, cracks and marks should be repaired with fillers, sealant, putties or grouting cements as appropriate for the finishing system and substrate and treat to achieve the required finish in accordance with industry standards before painting. Tint the filler to match substrate if the finish is transparent. Walls should be wiped down as necessary before painting; 7. Apply (all walls through the lobby and seating areas - including accent walls as designated on job walk) paint and related material with an undercoat plus two coats of selected finish color or with the number of coats specified in accordance with the manufacturer's recommendations. Allow each coat to harden for the drying time (or time between coats) recommended by the manufacturer; 8. Finish - Ensure each coat of paint is uniform in color, gloss, thickness and texture and free of runs, sags, blisters, or other discontinuities; 9. Furnish & install specified chair rail and stainless steel corner guards per job walk; 10. Wet Paint Warning - Place notices and do not remove until paint is dry