Specifications include, but are not limited to: (1).Unless expressly stated otherwise, the Contractor shall perform janitorial services in all general building areas. (2).The Contractor shall use commercial grade vacuum equipment that has been tested and approved under the Carpet and Rug Institute’s (CRI) Seal of Approval / Green Label (SOA/GL), such as the CleanMax CMNR-QD 10 Amp Nitro (vacuum), or equivalent.(3).The Contractor shall use microfiber mops and cloths to wipe clean surface areas. To reduce cross contamination, microfiber mops and microfiber cloths shall be changed out frequently during evening services and shall not to be shared between rooms. Microfiber mops and cloths shall be cleaned and sanitized daily.(4).The Contractor shall require all employees, including supervisors, to wear distinctive uniform clothing (see Exhibit A- Scope of Work, Section L).(5).The Contractor shall provide and maintain Material Safety Data Sheets (MSDS) for each chemical used and stored in the building (see Exhibit A- Scope of Work, Section O). (6).The Contractor is to follow low environmental impact cleaning practices (Green Housekeeping; see Exhibit A- Scope of Work, Section P). (7).Prior to commencement of work, the Contractor shall provide to the DMV Project Manager and DMV Contract Coordinator a list of all employees assigned to the office to perform services under this agreement. The Contractor shall provide twenty four (24) hours advance notice to the DMV Project Manager and DMV Contract Coordinator of any changes to the list.(8).The Contractor and their employees must sign in and sign out of the log book upon arrival and departure (must provide legible full name, date, time, and employer name). The location of the log book shall be coordinated between the DMV Project Manager and the Contractor.