Specifications include, but are not limited to: 1. Mobilize men and equipment to the job site. 2. All materials will be approved by District. 3. See included, “Bell Canyon Perimeter Fence” drawing. Verify dimensions by field measurements. 4. Install approximately 318 feet of 7-foot high chain link fence with circular razor wire. 5. Include galvanized round steel pipe schedule 40 posts to be set 8-feet on center. 6. Include galvanized fence fabric 7 feet high with 2-inch 9 gauge mesh. 7. Include galvanized top rails forming a continuous rail along top of chain link fabric. 8. Include galvanized tension wire 0.177 along the bottom of fence fabric. 9. Include galvanized tension bars at each end post and each gate. 10. Include galvanized barbed wire arms at each post to attach circular razor wire. 11. Include galvanized razor wire. 12. Include concrete footings for line posts with a minimum depth of 36 inches and a minimum diameter of 8 inches. All other footings will have a minimum depth of 36 inches and a minimum diameter of 12 inches. 13. Include all other fittings, tie wires and clips as required by Greenbook fence construction standards section 304-3.2. 14. Install (1) 20-foot double swinging gate (10 – ft. each). 15. Install (1) 4-foot walk through swinging gate.