Specifications include, but are not limited to: A. Provide direct-current fast charger (DCFC) level 3 DC charging (480V-3Ph-60kW). B. DCFC shall be rated for 300 VDC minimum. C. Each item of equipment shall have a nameplate bearing the following: 1. Manufacturer's name and address. 2. Electric Vehicle Charging Station (EVCS) model number and serial number securely affixed in a conspicuous place. Nameplate of the distributing agent will not be acceptable. Include additional information as applicable to identify the equipment. 3. Nameplates shall be made of noncorrosive metal. D. EVCS shall be pedestal mounted, single unit with charging cords type CCS SAE J1772 DC combo charging, or other OWNER approved universal type connector. E. Electric Vehicle Station Equipment (EVSE) shall include automatic web-based tracking / metering and control connection via a cell phone service provider compatible with Electric Vehicle Management system. 1. The web-based application shall generate per vehicle kW and kWh usage and charging times based on user input intervals. 2. EVCS Electronic Data Interface shall capture and be capable of push and pull file transfer of the parameters listed below: a. Web-based control capability shall enable remote charger station administration and access control by the OWNER. b. Open Charge Point protocol (OCPP) 1.6 minimum. c. Data must be User ID and Password protected. d. KW data report shall be Microsoft Excel compatible. e. It shall have the option to limit usage to designated users with bar code/key card type system (locked or open access). F. DCFC shall have bidirectional charging capability and shall comply with ISO 15118. G. The system shall support (Network Time Protocol) NTP/UTC time synchronization for Electric School Bus Chargers.
