Specifications include, but are not limited to:This Invitation for Bid (IFB) is issued by the Office of State Procurement (OSP) for Arkansas Department of Parks and Tourism (ADPT) to obtain pricing and a contract for one (1) shuttle bus. General 1. Allstar XL Series Passenger Bus or approved equal 2. Ford F-550 Chassis or approved equal. 3. 24 Passenger Bus 4. Two (2) ADA AND FMVSS Complaint Wheelchair Stations with Securement Systems 5. ADA AND FMVSS Compliant Wheelchair Lift and Wheelchair Door 6. 1000 pound wheelchair lift Exterior 1. Exterior body width: 8 feet, plus or minus 2 inches 2. Bumper to bumper: 32 feet, plus or minus 2 inches 3. GVWR: 19,500 lb. plus or minus 25 pounds 4. Reinforced steel construction meeting all applicable FMVSS requirements 5. Driver visibility window in front of entry door 6. Electric actuated passenger entry door with full length glass 7. High upper double T-Slider tempered safety glass windows with climate control tint 8. Black powder coated steel rear bumper 9. Rear mud flaps 10. Pre-painted white side walls and skirts 11. Fiberglass front and rear caps 12. One-piece seamless FRP (fiberglass reinforced plastic) roof 13. Breakaway rearview mirrors with convex 14. Sealed LED stop, tail, and turn signal lights with LED reverse lights 15. LED front and rear marker lights Interior 1. Interior floor to ceiling height: 80 inches, plus or minus 2 inches 2. Floor and wall seat track for flexible seating 3. Black slip resistant rubber floor covering – Complete Floor 4. White step nosing at passenger entry door 5. 5/8” exterior grade plywood flooring 6. Ceiling and rear wall sound abatement fabric 7. FRP (fiberglass reinforced plastic) sidewalls 8. White step nosing 9. 1.25” left hand vertical passenger assist rail at entry door 10. Printed circuit board with automotive-type fuses and LED trouble-shooting lights 11. LED entry door step well lights 12. LED driver and passenger area lighting 13. Non-retractable seat belts 14. Audio System: AM/FM/CD/BlueTooth/USB and PA with four (4) speakers, Jensen JHD3630BT or approved equal. 15. Passenger Area Rear Heat: Minimum 65,000 BTU, floor mounted system under one of the rear seats 16. Passenger Area Rear Air Conditioning: Minimum 96,000 BTU, dual compressors, rear mounted system 17. Mid Back Seating 18. Vinyl seat coverings 19. No aisle side armrests on seats 20. Four (4) passenger foldaway seats plus driver 21. Dual overhead passenger grab rails Engine/Drivetrain 1. Engine: 6.8 liter, V10, 362 HP @ 4750 RPM plus or minus 10 horsepower 2. Minimum 225 Amp alternator 3. Automatic transmission with four (4) forward speeds and one (1) reverse speed 4. Axle ratio: 4.88 5. Gasoline fuel tank: Fifty (50) gallon, minimum Tires and Wheels 1. All-season radials, tubeless 2. 225/70R19.5F 3. Dual rear wheels 4. Stainless Steel Wheel Insets