Specifications include, but are not limited to: A. Color - The temporary striping tape shall be white or yellow as specified for pavement markings. B. Reflection - The temporary striping tape shall reflect white or yellow respectively on dry pavement, shall be readily visible when viewed with automobile headlights at night, and shall be reflectorized with high index glass beads having a refractive index of 1.90 ± .05. C. Application Properties - The temporary striping tape shall adhere to asphalt and Portland cement concrete surfaces when applied according to manufacturer’s recommendations at surface temperatures down to 35°F. (2°C.) and shall be immediately ready for traffic following application. D. Conformability - The temporary striping tape shall be thin, flexible, formable and following application shall remain essentially conformed to the texture of the pavement surface. E. Thickness - The average thickness of the temporary striping tape shall be determined by five micrometer readings (using micrometer with a minimum 0.25 inch (6.35 mm) diameter anvil and spindle) on a sample applied to an aluminum panel and deducting the thickness of the aluminum panel. The average thickness shall not be less than 0.015 inches (0.38 mm) nor more than 0.045 inches (1.1 mm).