Specifications include, but are not limited to: b. The Owner has installed interior and some perimeter concrete curbs as footings for 4 inch diameter steel sleeves for fencing. All concrete curbs between the courts are below the finished surfaced and covered with two (2) inches of asphalt. c. Vendor is to provide all materials and equipment necessary to install all black vinyl coated galvanized chain-link fencing fabric, posts, gates, caps, connectors and other components to complete the installation. d. Vendor shall layout fencing to accommodate the following: Court dimensions – Playing surface - 20 feet wide by 44 feet long, plus an 8 foot wide surround or field at both ends and sides for clear dimensions of 36 feet wide by 60 feet long. The overall six court dimension with 10 feet wide (approx.) interior concrete walkway is 110 feet wide by 131 feet long. e. Perimeter Chain Link Fencing – 9 gauge fencing (before vinyl is applied) black vinyl coated fabric, posts and horizontal rails, typical. Ten (10) foot tall fencing at the perimeter of the courts at 10 feet O.C. Fence post footings to be approx. minimum 24 inches deep w/ 3 inch diameter posts to be installed at corners and line posts. Two - 4 foot wide (+-) by 7 feet tall pedestrian gates to be installed at the interior concrete walkway of the east and west fence line w/ fencing fabric above the gates. The vendor shall auger fence post footings at 10 feet O.C. for corner and line posts at east, west and north fence lines and install horizontal railings at the bottom of fencing. Vendor shall utilize the 4 inch diameter sleeves for fence posts in the 12 inch wide concrete curb at the south end of the court installed by Owner. f. Interior Chain Link Fencing – 9 gauge fencing (before vinyl is applied) black vinyl coated fabric and posts, typical. Four (4) foot tall fencing at the interior concrete walkway and separating the courts. Fence post footings to be approx. minimum 24 inches deep with 2 inch diameter posts to be installed at line posts with 2-3/4 inch diameter corner and gate posts. Six - 4 foot wide by 4 feet tall gates to be installed at each court entry. Walkway fencing posts to be set in 10 feet wide concrete walk. Fencing separating courts to be set in concrete curbs that are below finished surface, existing asphalt and concrete slab below. Install horizontal railings at the bottom of the fence. The vendor shall core drill all interior fence post footings.