Specifications include, but are not limited to: 2.1 Pricing Section A: Annual inspection, including oil change and maintenance and annual testing of transfer switch. First annual inspection shall occur within October of each year. 2.2 Pricing Section B: Annual load bank test to determine generator health and reliability. Shall be performed the same time as Annual Inspection in October. 2.3 Pricing Section C: Semi‐annual inspection shall be performed within April of each year. a. Start, run, and test unit b. Test battery(s) for age, condition, and charging functions; cleaning connections as needed c. Test antifreeze; add as needed d. Preform start draw test and record e. Change oil f. Change filters: fuel, water, and oil g. Check all safety and alarm signals h. Check all gauges for proper operations i. Check for leaks; water pump, j. Check coolant heater for proper operation k. Check exhaust system (from turbocharger to rain cap) l. Inspect fuel system, including: hoses, valves, and fittings; repair as necessary m. Inspect governor; adjust as needed n. Inspect the condition of all belts; adjust and replace as needed o. Inspect secondary ignition system; wires, caps, plugs, etc. p. Inspect air intake hoses and connectors q. Inspect duct work