Specifications include, but are not limited to: 1. WORK UNIFORM JACKETS: Customization and Alteration: Unless otherwise specified in the order, Contractor will sew a City of Phoenix logo patch on the left sleeve, two inches down from the shoulder seam. The patch will be 7,000 stitches and three inches (76.0 mm) in diameter. Contractor will use grey (PMS 425) for the lettering and purple/maroon (PMS 228) for the Phoenix bird and rings. The patch color will correspond to the color of the clothing item being ordered. Colors may change at the request of the department. A sample may be provided to Contractor upon request. 2. WORK UNIFORM PANTS, SHIRTS AND HEADWEAR: 1.2.1. T-Shirts: T-Shirts will have a pocket on the left breast. All t-shirts will be made in a professional manner to show no raw edges, loose threads, defective stitching or deformity. Current industry standards will apply to the materials used and the construction method. An array of colors and sizes must be available. Colors and imprints will be colorfast and fade resistant. 1.2.2. Button Down Shirts will be wrinkle resistant. 1.2.3. Customizations and Alterations: 1.2.3.1. Patches: Button Down Shirts. At City’s request, Contractor will sew a City of Phoenix logo patch on the left sleeve; the top of the patch will be two inches down from the shoulder seam. 1.2.3.2. Embroidery: Button Down and/or Polo Shirts. At City’s request, Contractor will embroider the City of Phoenix Logo on the left chest of the shirts. Color of thread to be identified by the City upon ordering. 1.2.3.2.1. Contractor must include backing under the embroidery (on inside of shirt). 1.2.3.3. Imprints: T-Shirts. Contractor will make an imprint of the City of Phoenix logo, three inches in diameter round, on pocket, heavyweight material. The imprint will be black, unless otherwise specified in the City’s order. 1.2.3.4. Hemming: Contractor will hem shorts and trousers to length ordered.