Specifications include, but are not limited to: Disassembly and Assembly - Contractor may be required to perform disassembly services (in shop or on-site) of various motors, generators, pumps, or other mechanical devises. This service will be necessary to examine and ascertain the extent of damage, cause of damage, damage assessment, and/or otherwise determine whether components are repairable or require replacement. This service may be utilized in conjunction with Section 2.B in the preparation of drawings from actual parts, components, mating components, or any combination thereof. Contractor may be required to perform assembly services (in shop or on-site) various motors, generators, pumps, or other mechanical devices. This service will be necessary to verify accurate, satisfactory, and acceptable repair or replacement of components provided under the specifications and provisions contained herein. Machine Shop Related Services - Contractor must be able to provide the following Machine Shop Related Services (minimum): 1) Precision Machining, including the following: a. Horizontal and Vertical Turning b. Milling and Planning c. Boring and Drilling d. Cylindrical and Surface Grinding e. Large Prototype Machining f. Metalizing and Spray Bonding g. Metric Machining Machinery and Equipment Services a. Mechanical Electrical and Hydraulic Repair b. Gear-reducer and Industrial Transmission Rebuilding c. Way Scraping, Flaking and Machine Alignment d. Fabricating Equipment Repair e. Design and Building of Specialized Machinery