Specifications include, but are not limited to: 1. For each hose assembly offered specifications shall be provided showing SAE compliance. 2. Each hose offered must be accompanied by Impulse Cycle documentation (See Attachment A). 3. All hose fittings offered must be compatible with the hose offered. 4. All fittings offered must meet SAE specifications. 5. Fittings must have a “No-Skive Bite the Wire Fit”. 6. All hose and fittings shall be clearly identifiable by manufacturer and model or part number. 7. All minimum bend radius for hose offered in this solicitation shall be as follows: a. 1/4" hose – Min. of 2” bend radius b. 3/8" hose – Min. of 2 ½” bend radius c. 1/2" hose – Min. of 3 ½” bend radius d. 5/8" hose – Min. of 4” bend radius e. 3/4" hose – Min. of 4 ¾” bend radius f. 1" hose – Min. of 6” bend radius 8. City Part No. 10-8-5409-7, Hose, Hydraulic, Weatherhead H54508, 1/2”, Hose with anti-abrasive outer jacket, shall meet a minimum specification of SAE 100R2 with a 3.50” minimum bend radius. This hose must be constructed with an anti-abrasive outer jacket.