Specifications include, but are not limited to: All areas (See Drawing) of the paved surface must be cleaned and prepared for sealing. Further preparation of the surface is crack sealing. All cracks ΒΌβ and wider shall be cleaned out and a Hot Rubberized crack sealant used to fill the voids. Any cracks larger than 4β wide shall be cut and a hot Asphalt patch applied for the entire length of it. Petroleum stains and saturated areas shall be cleaned and treated with a Polymeric Primer for better adhesion. A machine application of a minimum of two coats of Sealmaster MTR Sealer, or better, to asphalt surfaces. Contractor shall take measures to ensure traffic is limited to the work area. Parking stripes and Handicapped Parking marked areas shall be repainted with the configuration indicated on the attached overlay. All paint markings shall have a reflective media (Silica) applied.