Specifications include, but are not limited to: Overall Machine • Operating weight shall be no more than 19463 without optional equipment • Vehicle tie-downs (2 front -2 Back) • Remote grease bank for front axle • Heavy duty front bumper • Front counter weight shall be 1,250 lbs. • Fuel tank, 37 gallon ground fueling 4.3 DEF tank • 2 - position tilt hood • Tool bob with padlock with hasp • Vandal protection for locking monitor, engine hood, tool box, hydraulic reservoir, and fuel tank • Reverse warning alarm • Dent resistant full-coverage rear fender • Backhoe boom resistant plate • JD link, ultimate wireless communication system for 5 years • Ground clearance 13 inches • Overall height of machine shall be 9 feet 5 inches, transport height of 11 feet 9 inches • Overall length transport 24 feet 5 inches • Width over tires 7 feet 2 inches • Length from axle to axle (MFWD) 7 feet 2 inches • Rear tires 21L-24-inch, front 12.5/80-18 ENGINE • Shall meet EPA final Tier 4 (FT4) EU stage IV • Displacement 276 Cu. In. • Shall be wet sleeve engine • Net peak power 113 horse power at 2,240 rpm • Net peak torque 334 lb.-ft. at 1,400 rpm • Lubrication shall be pressurized with spin on oil and cooler filter • Air cleaner shall have dual stage dry type with safety element and evacuator valve • Electronic fuel lift pump • Engine shall have individually replaceable, wet sleeve cylinder liner design to dissipate heat for reduced ring ware and oil breakdown • Shall have economy mode and auto idle • Engine coolant heater COOLING • Fan type, electronically controlled, variable rate, suction type cooling fan • Engine coolant rating -40, degree F • Engine oil cooler shall be oil to water • Coolant recovery tank with low level indicator • Fold out hinged coolant system • Serpentine belt with automatic belt tensioner • Self-cleaning exhaust after treatment system