Specifications include, but are not limited to: 6.1.1. Provide trash pickup truck(s) with height clearance of no more than 12 ft. height. 6.1.2. Compactor pickup height varies for each location with a low ceiling of 12' 10". This would be for the maximum rail extension and pickup. 6.1.3. Provide front load and open tops waste containers that meet the following requirements: • Steel construction • Top lids are required for the 4- and 6-cubic yard container • Side doors are required for the 8-cubic yard containers • Containers must be: (i) In good condition as determined by the ADR (ii) Leak proof (iii) Steamed Clean (iv) Free of odor (v) Free of pests (vi) Painted (vii) Clear of any graffiti or advertising, except the advertising logo of the Contractor 6.1.4. Have an adequate inventory of various size containers necessary to fulfill the requirements of the contract on an "as needed" basis. 6.1.5. Furnish “front load” containers with various capacities listed below: Capacity Required Qty. • 4.0 cy 5 • 6.0 cy 11 • 8.0 cy 2 • 10.0 cy to be determined at later time 6.1.6. Furnish “open top” containers with various capacities listed below Capacity Required Qty. • 20 cy to be determined by ADR • 30 cy to be determined by ADR • 40 cy to be determined by ADR 6.1.7. Supply and deliver the requested size container to the location as specified by the ADR within 24 hours of request. The ADR will make decisions as to acceptability of all containers. 6.1.8. Ensure front-load containers have hatches or lid covers to keep animals and rodents out and to prevent rainwater from entering the container. Drain plugs will be required to be securely in place to prevent discharges.