Specifications include, but are not limited to: i. The Contractor shall only use Agency Furnished paint. ii. Designated cut trees in CTM harvest units shall be marked with blue tracer paint unless the task order specifies a different color. iii. Designated leave trees in LTM harvest units shall be marked with orange tracer paint unless the task order specifies a different color. iv. All marks shall be 1.5-2” wide and sufficiently visible for an operator to differentiate between trees to be left and those to cut. v. Each designated leave/cut tree shall have diagonal slash marks and a horizontal stump mark. Each diagonal slash shall be painted at an angle between 30 and 60 degrees and located between 4.5 feet and 7 feet above ground level. Diagonal slash marks shall be painted so they are clearly visible from all sides of the tree, with the tail end of one slash located directly above or below the tail end of the next slash. A horizontal stump mark shall be painted at ground level, ensuring the paint penetrates the nooks, crevices, and fissures of the bark. Each stump mark shall be 6-9” long and painted on the downhill side of the tree.