Specifications include, but are not limited to: a. Vacuum cleaners equipped with beater brush (roller brush) and a 95 CFM minimum capacity is required. The vacuum cleaners must be in good working condition and are subject to inspection by the Project Manager at any time during the course of the contract. b. A vacuum cleaner equipped with hose attachments suitable for vacuuming edges, corners, and other hard-to-reach areas; maximum load of 15 AMPS. c. A wet/dry vacuum cleaner with a minimum of 2 HP and a minimum 10 gallon tank; maximum load of 15 AMPS. d. A floor machine with dual speed: 100 to 120 RPM for buffing of tile floors and 50 to 70 RPM for stripping; maximum load of 15 AMPS. ; WORK AREA INCLUDED: All entrances, offices, foyers, printing rooms, lounge rooms, computer rooms, hallways, closets, conference rooms, break rooms, rest rooms, shower rooms, and storage areas as applicable. This also includes office glass, and interior and exterior glass portion of doors ; Thoroughly vacuum all carpeted entryways, entryway floor mats, stairway landings, lobbies, conference rooms, and hallways. 2. Empty all wastebaskets inside the building and outside around entryways of building. Secure trash in garbage bags and dispose of them in designated on-site containers. After disposal, close and secure the container lids and/or doors. At no time will trash be left inside the building. 3. Furnish and maintain adequate supplies of toilet tissue, seat covers, urinal deodorizers, sanitary napkins, paper towels, liquid hand soap, and room deodorizers in rest room. ; RESTROOMS: a. Clean, disinfect and deodorize rest room floors. Dirty, residue covered and/or discolored grout will not be accepted. b. Clean, disinfect and deodorize all plumbing fixtures. c. Clean, disinfect and deodorize all dispensers, mirrors, counters and cabinets. d. Clean, disinfect and deodorize all, toilets, urinals and partitions. e. Clean, disinfect and deodorize all sinks, water closet shower stalls and shower decks (if applicable).