Specifications include, but are not limited to: General severe weather wheel loader application and implement carrier with temperatures ranging from -50 to 110 ℉. Material weights up to 3300 lbs./CY. POWER TRAIN: Engine: Diesel, 4 cycle, 6.7 Liter minimum. Minimum 250 gross HP, J1995 (230 NET HP, ISO 9249) Minimum torque 900 gross lb-ft, J1995 (768 NET lb-ft, ISO 9249 or J1349) (Per Amendment #1) The engine shall meet current EPA emission requirements. Cooling System: Winter front: To be a heavy-duty vinyl construction, with stainless steel snaps or swivel locks and include a heavy-duty zipper. Installed over the rear grill area(s). If applicable, to be installed over the upper airflow grills. Anti-freeze: Extended Life type, affording protection to -50 ℉ and shall be DELO extended life coolant (red) or compatible. Cooling system shall include a petcock style drain for the lowest point(s) of the system. Must include variable speed cooling fan. DRIVETRAIN: Transmission shall be a power shift, forward and reverse with lock-up clutch torque converter. Transmission Disconnect: To include either a valve control or brake pedal control or transmission neutralizing feature which will allow transmission to be engaged or disengaged when depressing brake pedal as required for varying operating conditions. Automatic locking differentials on both axles. Limited-slip or hydraulic locking differential in front differential. (Per Amendment 1) CHASSIS: (*) The following chassis ratings to be based on 4.0 - 4.7 cubic yard, pin on, general purpose bucket with bolt- on cutting edge. (*) Operating Weight: Minimum 41,100 pounds including counter weight. (*) Breakout Force: Minimum 33,903 pounds. (*) Full Turn Tip Load: Minimum 25,800 pounds. (*) Bucket Hinge Pin Height: Minimum 161 inches.