Specifications include, but are not limited to: 1.All traffic signal poles in this bid, including Mast Arm Assemblies and Steel Strain Assemblies, shall be of the type previously approved for use in the State of Alabama.2.All prices shall be quoted F.O.B. City of Huntsville Traffic Engineering, and delivered to our pole yard at 2100 Clinton Avenue in Huntsville, AL. All correspondence shall be to 2100 Clinton Avenue, NW, Huntsville, AL 35805.3.Prices shall be quoted for Single Mast Arm Assemblies, Poles for Double/Equal Mast Arm Assemblies, Poles for Double/Unequal Mast Arm Assemblies. Additionally, Steel Strain Poles will be quoted. All poles in two types of finishes: hot dip galvanized (ASTM A123), and hot dip galvanized with powder coating. The finish type shall be specified by the City of Huntsville at the time of each individual order.4.For all Pole, Mast Arm Assemblies and Steel Strain Assemblies, if ordered powder coated, the color of powder coating, if used, shall be SHERWIN WILLIAMS DARK BRONZE OR BLACK in color, and shall be specified by the City of Huntsville at the time of each individual order. If another method of painting poles is used by a manufacturer, then this method should be submitted in writing with explanation of the method for approval by City of Huntsville. 5.The coating facilities shall be owned and operated by the pole manufacturer to ensure a quality coating system or if the manufacturer provides for another vendor to apply the coating, then documentation must be supplied at the time of bid stating which vendor the manufacturer will be using so thatit can be determined if the manufacturer’s choice of vendor meets our quality expectations. All painting whether by the manufacturer or by a separate vendor shall require AISC certification.PROVIDE REQUIRED DOCUMENTATION WITH BID.