Specifications include, but are not limited to: Digital Oscilloscope (Items 1 and 5): 1. Bandwidth, greater than or equal to 2 GHz,2. Sampling rate, greater than or equal to 16 GSa/s3. Number of channels, greater than or equal to 4 Ch4. Analog-to-digital converter resolution, greater than or equal to 10 bits5. ENOB, maximum 96. Full BW Noise Floor, as low as 43 μV7. Memory depth, greater than or equal to 200 Mpts/ch Memory8. Screen display, greater than or equal to 15.6” touch, full HD (1920x1080)9. VGA and Display Port for External Monitors10. Connection, greater than or equal to 2x USB 3.0, 3x USB2.0, Ethernet LAN with 10/100/1000bT ports11. Operation Systems, Windows 1012. System Storage, greater than or equal to 8GB13. Storage, greater than or equal to 500 GB Removable SSDSignal Spectrum Analyzer (Items 2 and 6):1. Frequency range, 10 Hz to greater than or equal to 26.5 GHz2. Preamplifier, 100 KHz to greater than or equal to 26.5 GHz3. Displayed average noise level (DANL), -152 dBm typical4. Analysis bandwidth, greater than or equal to 40 MHz5. Microwave preselector bypass6. I/Q baseband inputs, analog7. Connector Rear, 2nd IF Output8. External mixing to connect mixer to extend frequency coverage up to 1.1 THz9. Screen display, greater than or equal to 10.6” touch, WXGA (1280x768)10. Storage,greater than or equal to 500 GB Removable SSD11. Operation Systems, Windows 1012. Connection, greater than or equal to 2x USB 3.0, 3x USB2.0, Ethernet LAN with 10/100/1000bT ports13. VGA for External MonitorsMixer to E band (Items 3 and 7):1. Waveguide Harmonic Mixer, 60GHz -90GHz