Specifications include, but are not limited to: Fixture and integral node shall be made in the USA; Tunable white from 3000 to 5000K CCT; 50 Watts; Housing/Reflector – Precision die-formed 22-gauge C.R.S. ; Shielding – Frosted acrylic. ; Finish – Highly reflective non-glare matte white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion. ; Electrical – High quality mid-power LED boards. Low-voltage DC fixture to be fed by Class 2 power supply.; Mounting – NEMA Type “G with surface mount and drywall kit accessories available. To ensure quality and ease of installation, integral PoE node shall be prewired and programmed at the fixture manufacturer production site. Each fixture shall receive power and data from PoE network switch, interact with connected devices and pass power and data downstream to any daisy-chained nodes via the CAT5e/6 bus. Shall be capable of daisy chaining up to five (5) nodes from a single switch port.