Specifications include, but are not limited to: The Contractor will deliver a turnkey design, installation plan and commissioning of the delivered solution, including, but not limited to, the following elements of the project: RF site surveys. Physical inspection of the building and coordination with University officials on construction methodologies. RF modeling and design work necessary to fulfill the specified RF design goals. Contractor performed installation labor will be limited to “plug and play” of all interior and exterior equipment and antennas with all in-wall labor to be performed by others. Contractor will be required to use UA OIT, UA low voltage wiring standing contract, or other means as mutually agreed for in wall wiring work. Contractor to produce specifications and oversee all installation labor to be performed by others. Coordination and approval from cellular carriers for installation of the system. Commissioning and optimization of the installed system. Creation of as-built documents. Training for University of Alabama staff.