Specifications include, but are not limited to: 1 The aluminized Type 2 steel coils shall conform to the applicable requirements of AASHTO M 274 or ASTM A 929. SECTION 2: PIPE 2 The corrugated steel pipe shall be manufactured in accordance with the applicable requirements of AASHTO M-36 or ASTM A760. 3 The pipe sizes shall be 96", 14 gauge and with 5" x 1" corrugations. 4 A pair of lift lugs shall be provided for each 96" section and shall be adequate to facilitate the lifting and installation of pipe sections. 5 All fabrication of the product shall occur within the United States. 6 Stub tees into 96” pipe shall be provided in 36” and shall be fabricated at shop prior to delivery to job site. Location on 96” pipe and angle to lifting lugs will be provided to selected bidder. SECTION 3: PIPE BENDS 7 Pipe Bends shall be constructed of corrugated steel pipe and shall be manufactured in accordance with the applicable requirements of AASHTO M-36 or ASTM A760 8 Pipe Bends sizes shall be 96” diameter, 14 gauge and with 5” x 1” corrugations. SECTION 4: CONNECTING BANDS 9 Bands shall be two pieces, 18 gauge minimum with bolted connections of adequate width to join 96” pipe sections. 10 Associated gaskets shall be provided for each band as a separate bid item. SECTION 5: HANDLING & ASSEMBLY 11 Shall be in accordance with NCSPA's (National Corrugated Steel Pipe Association) recommendations.