Loading...
Skip to main content
< Back to results

Column Tabletop Testing System


Delivery Location
Madison County, AL, USA
Publication Date
03/01/2018 01:31 PM EST
Closing Date
03/14/2018 02:30 PM EDT
Issuing Organization
University of Alabama - Huntsville
Solicitation Number
Description

Specifications include, but are not limited to: Single Column Tabletop Testing Systems Requirements  1kN (225 lb.) Load Capacity Universal Test System  Frames with 100N Load Cell  Bodycoat base cover minimizing the effects of liquid spillage on the system base.  Temperature-controlled bath  Waterproof Pneumatic Grips with rubber-coated faces  Footswitch  Variable Angle Peel Fixture  3 Point Bend Fixture  Standard Video Extensometer w/attachment allowing the Extensometer to be used with WaterBath  Software w/ Side mount Touch Dashboard - NO additional PC required  Onsite Installation services, and Training Services 1x Materials Testing System, Single column table top electromechanical testing system including: - Integrated digital closed-loop control and data acquisition electronics including crosshead extension and load measurement channels - Test control panel with two softkeys, with display, start, stop and return functions, programmable function keys, test status indicators, variable speed jog and specimen protection. - Testing speed range: 0.05 to 2500 mm/min (0.002 in/min to 100 in/min). - Crosshead return speed: 2500 mm/min (100 in/min) - Base adapters: Type O female fitting (6 mm diameter clevis pin) and Type D female fitting (0.5 in clevis pin). 1 English language option 1 Voltage option 240 V 1 BioCoat Liquid and dust resistant cover for Materials testing Systems ~ Load Cell ~ 1x Load Cell Capacity 100 N (10 kg, 22 lb.) - Type OOf Tension/Compression Type OO female fitting (2.5 mm diameter clevis pin) Includes adapter to Type O female fitting (6 mm diameter clevis pin). ~ Water Bath ~ 1x Water Bath Standard features include: - Bath designed for use with distilled water or saline solution for testing biomedical test specimens - Includes an upper and lower pull rod for mounting of grips or testing fixtures - Cable for 0-10V analog output to a 25 pin cable to connect to a Signal Conditioner Module - Pneumatically powered lifting mechanism smoothly raises and lowers the bath, preventing spillage - Allows accurate close loop control of bath temperature at 37 °C ±1 °C - Upper pull-rod designed to minimize buoyancy changes during low force testing - Pull rods have M6 female connections with two 3 mm pins for fixture/grip mounting and alignment. - Upper pull rod fitting: 2.5 mm clevis pin, male - Includes a 6 mm clevis pin, male to a 2.5 mm clevis, female coupling. - Lower pull rod: Connects to the base of the bath. Compatible with Advanced & Standard Video Extensometer 2 (AVE2 & SVE2) for axial strain measurements

Source
http://www.uah.edu/business-services/vendors/bid-opportunities (opens in a new window)

Get instant access

to solicitation details & future business opportunities.

Get Access

Vendor packages with access to similar open solicitations

Statewide

Matching bid notifications & access to all Statewide & Group bid details

Group

Matching bid notifications from participating agencies

Basic

Access participating agency bids