Specifications include, but are not limited to: TRACTOR, CRAWLER W/BLADE THAT TILTS AND ANGLES HYDRAULICALLY, 92 NET FLYWHEEL HP, NEW LATEST MODEL, PER PROVIDED SPECIFICATIONS, * 2 EACH * New latest model Crawler Tractor LGP with power angle, power tilt inside mounted blade; meeting the following specifications in accordance with manufacturer's standard published specifications. Engine: Diesel; 9 2 net flywheel horsepower; 24 or 12 volt electric system; 55 amp alternator. Power: Main power cut off switch. Transmission Type: Hydrostatic drive. Steering: Wet disc, oil bath type, or hydraulically controlled. Service Brakes: Shall be oil bath. Parking brake to be provided. Undercarriage: Track gauge to be at least 6 8", sho e s to be at least 2 4" wide. Six ( 6) bottom rollers per side and lifetime lubricated. Tractor shall have sealed and lubricated track chains and hydraulic track adjusters. Ground clearance 1 3" or more. Must have at least 86 " of track on ground. Unit to be equipped with rock guards. Blade: Power Angle and Tilt, at least 115 " wide and at least 3 3" in height with a raise height of at least 27.9" and tilt 15" to either side with float position. Blade to angle at least 22 degrees to either side. Operating Weight: At least 19 , 700 lbs. Ripper: A minimum of 3 shanks and 3 shank pockets. Other Equipment: ROPS cab w/heater & defroster; air conditioners; LED work lights; back-up alarm; track guiding guards, full length; drawbar; engine side panels; front pull hook; radiator sand screen or severe service radiator; engine and transmission guard; armchair type suspension seat with seat belt; vandalism protection with locks; all service compartments must be lockable; instrument gauges to monitor all critical functions; cold weather starting aid. High intensity LED strobe light.