Specifications include, but are not limited to: The concealable soft body armor described herein is intended for primary use as an undergarment-worn concealably under a uniform or other type ofshirt. The stab resistant vest shall consist oftwo primary components-the STAB RESISTANT PANELS which consist ofthe stab resistant panels enclosed by a protective STAB RESISTANT PANEL COVER and the VEST CARRIER or "outer-shell". 3.1 GENERAL DESIGN and USER COVERAGE: The soft body armor must provide maximum practical protective coverage for male and female corrections officers for everyday wear. However, it must not bind or restrict user mobility or wearability. The intent is to provide full wrap or overlap protection ofthe torso - coverage is to be the maximum available consistent with wearability needs. This is defined as a vest with "full wrap" side panels that "butt fit" at the sides, with no more than 1" gap or overlap design in which the side panel overlaps for the highest degree of coverage. Suitable relief 1-2" should be allowed between the bottom edge ofthe vest and the duty belt while standing so that no binding occurs when the officer is in a sitting position. Ample reliefmust be provided in the armpit region for maximum mobility and a 2"-3" scoop neck must be provided to maintain concealability and prevent the armor from showing when worn under a shirt with an open collar.