Specifications include, but are not limited to: Six (6) Clopay Motor Operated, Minor Ribbed Steel, Thermal-Broken, Polyurethane Insulated Doors Model: 3729 (or equivalent) Panels: Foamed in place polyurethane core construction between exterior and interior steel skins Steel Skins: Formed from roll formed commercial or drawing quality steel sheet, hot-dip galvanized per ASTM A924/A 924M and ASTM A 653/A 653M, pre-painted with primer and baked-on polyester topcats; sections formed to create weather tight tongue-in-groove meeting joint. Reinforcing: Galvanized and primed steel reinforcement located under each hinge location, pre-punched for hinge attachment. Handle: High impact polymer step plate/lift handle on bottom panel section. Wind Performance Requirements: Design doors to withstand positive and negative wind loads as calculated in accordance with 2012 International Building Code. Design Wind Load: 140 MPH Safety Factor: 1.5 times design wind load